Tuesday, April 16, 2024

April 16, 2024. So you didn't get a refund?

Well, lots of folks didn't. But here is something to take your mind off of having to write the IRS a big check. 

A first look of a potential amplifier circuit using a P Type MOSFET. 

IRF9Z34SPBF ~ $1.92 @ Digi Key

 

 

The Green line is the output and the Blue line is the input. The simulation shows about a 30dB gain at 15MHz.

The device in the LT Spice simulation was from their library. This is an obsolete device, and the Substitute is the IRF9Z34SPBF from Digi Key.

I do not know how valid this is as a working piece of hardware, but these results look promising as we march toward a PNP version of the P3ST.

The secret of the mounting of this SMD device is to use a small piece of copper sheet available from Jeff Bezos roughly the size of a postage stamp and solder the tab to the copper plate allowing enough extra space at the top to pass an insulator for a 4-40 bolt as found in the TO-220 transistor insulator kits. 

Go back a few posts about the use of the aluminum U Channel for the IRF510 heat sink. The assembly now involves the Device soldered to the copper plate the mica insulator between the copper plate and the U Channel and then a 4-40 tapped hole into the U Channel. A wire soldered to the copper plate is the Drain connection.
 


73's
Pete N6QW

Monday, April 15, 2024

April 15, 2024. If you are just now starting to work on your income taxes --likely not a good omen.

April 15th and its Tax Day. Hopefully you are getting enough back to buy an ICOM IC7300. (About $1K is all that is needed) 

Putting aside my personal bias for homebrew gear, the IC7300 has withstood the test of being one of the better purchased radios.

Some personal excitement as I just saw a You Tube video from VK3PTM, who also shares the same first name as me. He has built the PSSST SSB Transceiver from K7TFC's kit and it is inhaling RF in a contest environment. So aside from the original one I built, and the one Todd built we have Peter's (VK3PTM) now hearing signals on 20M. There may be others, but this is the only video I have seen using the kit.

Peter has a blog and he has documented what he has done on the build. There is also a link to the you tube video there.

Once you check out Peter's blog then compare Todd's kit to my prototype below and you get a feel of the FB work done by Todd.



The excitement also holds for me a clear view that it is possible to build a good working radio that does not use Bitx circuits, TIA Amps, nor circuits from EMRFD or something being beat around by a Facebook group. The bonus only 7 transistors. This truly is a DifX --something Different than a warmed over Bitx with a new front panel.

All of my projects I consider as experimenter's platforms and Todd's kit is designed that way. I truly hope there will be some experimentation going on by those who bought the kit. 

To that end I am completing a design for an all PNP version of the P3ST. I even have some preliminary info on a P Type replacement for the IRF510. All of the circuit boards I have stored in the CNC computer will simply port over to the PNP equivalents of the 7 NPN's originally used on the P3ST. Watch this space.

BTW I think I have a way to mount the P type on a heat sink since it has a solder tab. Stay tuned.

73's
Pete N6QW

In case you are keeping score...

 Interesting results... Iowa : Joni Ernst's Republican seat was won by Democrat Josh Turek. [senatordb.com] , [ballotpedia.org] Kansas :...