Monday, August 4, 2025

A Critical Piece for the 20M Hybrid Wireless!

The Digital LO and BFO remains front and center of the new 20M Hybrid Rig. The mere fact that the circular dials move in unison and with a 3.2-inch display adds a whole new dimension to an exciting quasi-retro rig. 



JF3HZB Analog Type Dial

While the above photo shows a 40M display, the sketch must be modified in several ways for use with the 20M Hybrid Wireless Set.

First and foremost is that an Analog VFO or BFO is not in the mix. I want a homebrew retro rig that will not be scorned because the VFO drifts or that is not on frequency. We have the technology, so let's use it.

The JF3HZB sketch is quite complex and way beyond that needed for "Hello World" or the Miyagi LED On LED Off. The sketch as presented provides for only one selection for the sideband. Thus, the code must identify a switch (high or low) and that switch triggers logic to use one of two BFO frequencies. 

The ESP32 coding while it uses the Arduino IDE to load the code is slightly different than what is used for a Nano or Mega 2560 or even the Uno R3. Thus, the development work.

There could be other info that would want to be displayed, and the only area available is located at very bottom mid-screen. It took some hand hockeying just to get my call sign and LSB displayed on the 40M Hybrid Wireless and so it is a bit more complex. 

In summary, development work is needed to change the range of the LO, to add sideband select and to reserve an area on the display for other info. I envision this is more than a one and done project. 

The sideband select is not as critical for the 20M Hybrid Wireless Set as the norm is USB which works FB for FT-8. But it is a problem on 40M where the norm is LSB. So, solving sideband select opens a big opportunity for FT-8 on the 40M Hybrid Wireless. 

Them that know can make things go.

73's
Pete N6QW

Sunday, August 3, 2025

You Never Know what will show up on eBay

Check Out this Listing On

 eBay 


Imagine my surprise as I was lurking through eBay when I spotted this item. For those who will not start a homebrew project unless there are circuit boards that excuse has been removed! Snap this item up as when these are gone... they are gone. It is a proven design, and you have chance to claim, "I homebrewed a rig". (Well almost). 

So back to the homebrew 20M SSB Hybrid Wireless set. Long ago I realized homebrewing a rig had a lot to do with real estate. Whether it is the space allocation on the front panel or the area needed for the circuitry... it is all about the real estate availability. 

When I built the 20M Shirt Pocket SSB Transceiver the front panel (2X2 inches) was the minimum size needed to fit the I/O. Control knobs, jacks and switches all needed space and after an exhaustive evaluation, the 2X2 inches was the minimum. Fat Fingers also had a "finger" in that pie!

But also important is the physical arrangement of the tubes (or devices) that minimizes the wiring while at the same time considers unwanted feedback paths. The last thing you do is drill holes and the 1st thing is some paper layouts of the devices. In the new 20M rig, there is a bit of cheating based on tribal knowledge and having built the 40M version.




The layout above was developed over a 60-year period from the 1st metal plate that was used for the 40M version to the latest 20M Hybrid Wireless. 

There is some "Tribal Knowledge" to soak in and I will try to point that out to you. 

1. The right and left sides of the photo are essentially inputs and outputs. On the left side we have the Microphone Input (12AU7) and Audio Output from 1/2 of the 12AX7 where the other 1/2 is also the Product Detector.

2. On the right side the output from the 12BE6 Transmit Mixer goes to a Band Pass Filter and on to the Driver stage which I am keeping as Solid State. The signal coming from the Antenna Relay (not shown) passes on to a 2nd Band Pass Filter which is ahead of the 12BA6 Receiver RF Amplifier stage. One Band Pass Filter could be used and relay switched between these two parts of the circuit, but I used two to minimize any possibility of feedback paths.

[Experience with the early Bitx20 showed how using a common relay could create a feedback path. Others saw this same problem.]

3. Our Digital Electronics (not shown) provide a LO and BFO signal. The LO goes to the 6BE6 Receiver Mixer and the 12BE6 Transmit Mixer. Thus, an LO port to the right of the Heathkit Filter and midway between the 6BE6 and the 12BE6 would provide an optimal location. BTW we found that in the 40M Hybrid Wireless that a ferrite core homebrew 2.5 MHy Plate Choke could also be used as a matching transformer to the 50 Ohm Band Pass Filter.

4. The BFO signal is supplied to the 6JH8 Balanced Modulator on Transmit and the 12AX7 Product Detector on Receive. Thus, a BFO Port to the left of the Heathkit filter and mid-way between the 12AX7 and 6JH8 is a good location. Some distance from and a bit of shielding is needed for this port, so the Filter is not picking up the BFO signal.

5. In this design and layout only one tube is used on both transmit and receive. That tube is the 12BZ6, the 1st IF amp stage. A small value Silver Mica cap samples the signal on the plate of the 12BZ6 and that feeds the 12BE6 which is the transmit mixer. Thus, the need to have the 12BZ6 and the 12BE6 in close proximity.

A nightmare in the 40M wireless was to not think about space under the chassis for terminal strips to hold parts. Allow some extra space around tube sockets and mounted parts that provide anchor points for 4, 5 and 6 lug terminal strips.

With this 1st sketch of a layout the next step is to place actual part sizes on a new sheet of paper. I have some metal washers that are the same size as 7 pin and 9 pin tube sockets.  So, it is a simple matter to draw around the washers to represent the tube locations. The ARC-5 IF cans are quite larges and I used a cardboard cutout to represent their footprint. 

The Heathkit filter I have is an older and larger footprint than the one shown in yesterday's blog. I need to absolutely verify that it works and if OK will use it in this rig. The larger sizes simply add an air of authenticity and aura of an older wireless set built with some parts from 2025.

The Digital LO with some in-depth thought can be a module mounted to the front panel and that avoids having to provide horizontal real estate. 

Front panel controls would include the Audio, Mic Gain, RF Gain and Carrier Balance. Switches would include USB/LSB select, MOX, as well as Mic Input and Headphone output. Since the Driver will be broad band solid state the 12GE5 Final Amp tuning control will be a Tune Cap using a fixed Loading Cap like in the Hallicrafters SR-160. The Heathkit Meter could be used for TFMS (Tune For Maximum Smoke).

My seat of the pants says a 12X12 inch chassis using an aluminum base plate of that size. Thank you, Lauren Bezos, as your OM sells 1/16-inch plate in that size. BTW get the 3003 or 5052 type aluminum which is easily bent, shaped and drilled. The 6061 is much more difficult to work without heat treating it first. 

The back apron should include space for an 11Pin "octal type" power plug, BNC antenna connectors, RCA jacks, bias pot adjustment, ground lug and fuse for the DC circuits.

Them that know can make things go.

73's
Pete N6QW

Saturday, August 2, 2025

New 20M SSB Hybrid Wireless Rig Topology.

Following the decision to start another Hybrid SSB rig, it might be well to elaborate on some of the details. The first detail entails refining some of the features of the original 40M Hybrid Wireless Rig.


First is the change to 20M and the addition of AGC. Sure, I could ride the RF Gain Control, but at this stage of life I want something a bit more "automatic". A big development effort involves modifying the JF3HZB sketch to include sideband selection. Finally, is to add a tube final so you would have about 25 to 30 watts at the output. The Driver and Audio Amp would remain solid-state and likewise for the Digital LO and BFO.

The Devices would include the following:

12BA6   Receiver RF Amp
6BE6     Receiver Mixer
12BZ6   1st IF Amp
12BA6   2nd IF Amp
12AX7   Product Detector and Audio Pre-Amp
12AU7   Microphone Amp
6JH8     Balanced Modulator
12BE6    Transmit Mixer
12GE5    Transmit Final

2N2222A + 2N3053 Transmit Driver Stage
2N3904 + LM380 Audio Amp Stage

ESP32 + Si5351 for the LO and BFO

The circuitry would also employ two separate Band Pass Filters to simplify the RF switching. An interesting tidbit is that only one tube is common for both Transmit and Receive and that vacuum tube is the 12BZ6 which is the 1st IF Amp stage. 

I have a Heathkit 3.395 MHz Crystal Filter and am looking to use that unit. This also offers the opportunity for building the rig for 17M. There is such a filter on eBay right now for $22. This is competitive with the cost of a homebrew filter and avoids the use of the questionable Nano VNA's.




The power source would be the Heathkit HP-23 supply + a 12VDC @ 5 Amps supply for the Filaments and the Solid-State Devices.

Them that know can make things go.

73's
Pete N6QW


Friday, August 1, 2025

A Crossroads and a Decision!

Making some decisions is not as simple as flipping a coin and acquiescing to some basic paradigm. If it's heads, I will do this and if tails I do that.

The critical decision is to stop ever again from buying some run-down boat anchor in hopes of making a score on a resale and only concentrate my efforts on new construction. The 3rd dimension is my age, as the time horizon for new projects is growing much smaller. Sounds like I have made that decision in just trying to frame the scope of the issue.

This may be the one last project, so it best be good. Yesterday I fired up two rigs, the first being the Transcom SBT3 and the second my homebrew Hybrid Wireless with the JF3HZB dial. Side by side and switching only the antenna between the rigs, the Hybrid Wireless won by a huge margin. 


A Homebrew Tube SSB Transceiver from Isreal

[Several years ago, I spotted this rig from a ham in Isreal, and he was kind enough to respond to my email. His finished rig is a work of art. Note the Styrofoam thermal insulation around the VFO Box.  The IF Transformers are made from ARC-5 parts. I have three such transformer cans, where two are for the IF and one for the Balanced Modulator. These cans were a gift from N2CQR. The Filter is an 8 pole 9 MHz unit from KVG... Yep, have one of those too.]

Looking in the junk box, I have more than enough parts to build a 2nd Hybrid Wireless only this one on 20M. Needless to say, this one will also have the JF3HZB dial. Time to dust off those Greenlee chassis punches! 

This immediately raises the specter of why Hybrid versus all solid state. In part, the answer is that vacuum tube rigs is the place where I started and perhaps only fitting that tubes would be one of the final projects. I might even be able to fit in the 8042 finals I bought for the Transcom SBT3.

I located a local source for aluminum plate that has small cut-off pieces for sale and so that is another incentive for some metal bashing and chassis builds.

Bottom line: Stick to well-known topologies and concentrate on performance.

73's
Pete N6QW



Thursday, July 31, 2025

More Vacation Stuff.

With apologies to those blog readers who always expect tribal knowledge from the Oracle at Newbury Park, there is none today!

Quite frankly I am still recuperating from the week of whirlwind of activities that normally might take two weeks. We left few stones unturned in terms of things to do and see. In looking at the photos of myself I am reconciled that I am old (despite trying to think like an 18-year-old) and my get up and go has got up and went.


Hiding in the Photo is N6QW

There are some general observations worth sharing which I now will discuss. The very 1st is the kindness and courtesy of folks living outside of California. More than once folks inside the elevator actually tried to hold the doors open so you could ride without waiting. In CA, there is a race to close the doors in your face. 

Young people were courteous and polite. Given that I do have hair and it is all white, young people would open doors for me. Wow, that never happens here.

Recognition of Veterans. At virtually all attractions I was asked if I was a Veteran and that usually resulted in a reduced admission. There were also four museums dedicated to veterans. 

At one museum, if you were a Vietnam Veteran, you were presented a pin. One YL docent at a museum on Chyenne, asked me about being a veteran and I pulled out my key ring and showed her my "dog tags" and my foldable MIC (Meal Individual Combat) can opener. 

Yes, I carry those on my key ring to always remind me of those who gave their lives so we would have our freedom. I could tell she had a lump in her throat. The dog tag carry is also a good way to identify me should something happen. 


An extended Jeep Wrangler
Garden of the Gods Tour
The OM, N6QW

We visited Buffalo Bill Cody's grave site and museum. Buffalo Bill was awarded the Medal of Honor for his service to our country. Iron Tail a Oglala Lakota chief a participant in Cody's Wild West show was one of three composite models for the Indian Head Nickel.




The Argo Gold Mine had a catastrophic failure where water flooded the mine, and it had to be sealed off.







Nick attempts opening the Mine!

A recent analysis indicates in excess of $100B in Gold is still in the mine which is a tipping point to actually reopen the Argo Mine. 


Railroad Museum. Son, Nick at the Throttle

Funny story about the RR Museum in Golden, as there was a replica telegraph office in the Museum complete with a "guest CW Key and Sounder". I sent CQ and my call and the OT Docent said Welcome N6QW.

We had a great visit to the Denver Mint, where it is one a few government operations that is entirely self-funded. The US actually mints money for foreign countries and sells "proof sets" for profit which generates the operating revenue. 

The only test not performed on me before entering the Mint was the alien rectal probe. You had to turn off your phone, no camera's, no electronic devices, no purses, no backpacks, no fanny packs! Everything out in the open and you were always surrounded by armed guards. 

The original die for the coins is quite large and an electronic pantograph takes the original and creates a second die at scale. They were in the process of shutting down the Penny lines. 

Would I recommend a trip to the Denver area. Without reservation the answer would be yes, but only if you plan your activities well in advance and many require a reservation well in advance.

Nick and I are thinking of a sojourn to New Mexico in the fall but 1st I am trying to locate a Geiger Counter for my personal use as I want to visit the Trinity Site. 

Didn't see any beam antennas and Ham Radio Outlet was a fairly small store and this location seemed to favor Yaesu products. 

Them that know can make things go.

73's
Pete N6QW

Wednesday, July 30, 2025

The Project X Reveal.

[I suspect ICE to have impacted the two flower sellers at the cemetery. I try to visit the XYL's grave every Friday and bring fresh flowers. I purchase the flowers at a roadside stand near the cemetery entrance, where the price is excellent, and the selection is unique. 

The two YL's who support the stand are sisters and have mentioned they are there "every day". Since I was away last Friday, I made my makeup visit yesterday and will be back again this coming Friday. The YL's are in place at 8AM. They were not there yesterday, and the time was 9AM. Since the town is Oxnard and the favorite fishing hole of ICE... we can surmise what happened! The XYL got a visit but no flowers.]

The beauty of my sojourn to Denver was to help clear my brain fog. With that clarity I can only say to myself what were you thinking. 

The Project X radio is a Transcom SBT3. It was a short-lived product and only about 500 were made and sold. Two hundred were sold to the Philippine government and the rest sold to hams. 








The SBT3 is a triband (80/40/20M) 100-watt SSB radio employing mostly transistors and two instant heating 8042 (6146 like) tubes. There are some innovations such as potentiometer tuned varactor diodes for peaking RF circuits and a three transistor Driver stage that developed enough RF to fully drive the 8042 RF amp tubes to 100 watts out.

I really overpaid to acquire the radio, but the idea was to fix it and then resell it with a large markup. I overestimated my ability to do so; but did have some success in restoring some aspects. I think my plan defines the word hubris.

Aside from being dirty (Krud Kleaner fixes that) some Bozo installed a micro-switch in a mounting hole whose sole purpose was to turn off the panel lights. 

A black escutcheon trim that outlines the Frequency window and S Meter is made from a thin sheet of copper that is stamped to provide a contour outline and two viewing windows. This escutcheon is removable, and the original factory install simply soldered two flat head screws to the back side and in turn these screws were passed through the panel and nuts applied to the back side of the front panel. 

Again, the Bozo must have tried to remove the escutcheon and pulled the piece from the screws. His solution was to drill right through the escutcheon and use a big bolt and washer to hold the assembly to the front panel. You can see that in the 1st photo.  I was successful in fixing the micro-switch hole and the escutcheon hole.

Electronically, I actually found some OEM PNP transistors and replaced a couple of weak units and did some alignment. Prior blog posts mentioned that on transmit there is an inexplicable issue on 80M. The other bands do not have the issue. 

Several of the control knobs were missing the aluminum insert. In one case I had a very close replacement knob and in another I made an aluminum insert.


Repaired Front Panel


Hole Repair of the Micro-Switch install




Repair of Hole in Escutcheon

I stripped off the black paint and filled the hole with solder since the base material was copper and the repainted. The two flat head mounting screws were then super glued to the back of the escutcheon.


Trim and PA Tune Knobs

The next steps normally would be to modify the Tempo One power supply to fully power the Transcom SBT3. But that still does not resolve the lower level 80M signal issue nor any issues that might be found in the final amplifier stages. In short, a lot more work that most likely would only provide a marginal unit. C'mon Pete there was a reason not many were sold. 







So, I may just stop here, rein in my hubris and sell the SBT3 at some future time for a deep discount. But putting aside the money spent, I sure learned a lot about how not to do things. With the XYL's passing at least I won't get from her the usual comment "you did something really stupid!"

Hubris = exaggerated pride or self-confidence

73's
Pete N6QW

Tuesday, July 29, 2025

Where I went on my summer vacation? I went to Denver!

Nothing like a family vacation with son #3 to clear the head. Son, Nicolas and I had an amazing week's adventure visiting in an around Denver and Chyenne, Wyoming.



Son Nick!


Broadmoor Resort Hotel


Manitou Wilmot Castle



Garden of the Gods Tour


Zoo Tour


Girl Tattoos

Man did I see some girl tattoos and above is an example of a YL security guard at the Chyenne Frontier Days. Perhaps with her shorts off other unseen parts of the tattoo may provide a panoramic view of a rare art montage. But we will never know.

I heartily endorse those who feel comfortable in engaging in body art and piercings. Though I must wince at the prospect of where some of the piercings may be located. It is not my body and so let the sleeping dogs lie.

That said some were very artful while others took on the aura of the rustic Russian prison tattoo. There were just so many to be observed that I thought it important to mention.

Coor's Beer!

Some statistics 1st. About 65,000 cases produced per week, a can line rate of 4500 cans per minute. World's largest single site brewery with a shelf life of 119 days. Drink Up!


The Brew!

Shortly before heading to the airport for our return, we visited the Denver Mint and Ham Radio Outlet. After some knob twiddling, I concluded I would not buy a FT-710 or FTdx-101D. At this store the FT-710 seems to outpace the IC-7300. My Hermes Lite 2.0 with Thetis SDR Software will do all the FT-710 does and more.

We visited many museums as well as Breckenridge (Took the Chair Ride) and Vail where we watched rich people. Idaho Springs has the Argo Gold mine where we went inside the tunnel and later put our hands on some Dinosaur tracks on Dinosaur Ridge. 



N6QW at the Argo Gold mine.

Sunday was spent at the Air and Space Museum (Lowry AFB) where I got to see some products from my former company, the AV8B Harrier Jump Jet and the F4 Phantom. One exhibit was of a Mechanical Mule. See Below


Mechanical Mule

The MM saw service in South Vietnam hauling supplies to the troops. At the very end of the cart are some stacked cardboard boxes. The lower (larger box) is a Case of MIC's (Meal Individual Combat). The smaller cardboard box is an individual meal, in this case Turkey Noodle Loaf. The metal boxes contained ammunition.


F4, Phantom, Logo from McDonnell Douglas.

If you are into military airplanes, you have heard of the Kelly Johnson, Skunk Works (Lockheed). Well, my former employer has a comparable unit known as The Phantom Works and has a distinct logo similar to the one above.

Stay tuned for the reveal on Project X.

Oh, sitting at my front door when I returned was a box from Amazon. In the box was a Proster LCR Meter. I did not order the unit and can only assume some kindly blog reader sent it to me. I have no idea who but Thank You!

Them that know can make things go!

73's
Pete N6QW


In case you are keeping score...

 Interesting results... Iowa : Joni Ernst's Republican seat was won by Democrat Josh Turek. [senatordb.com] , [ballotpedia.org] Kansas :...