Monday, August 11, 2025

Wire Wrapping

Security Check: Alexa Off, Tape over the Lap Top Camera, Mic on Mute. No doubt you are being spied upon! The spy could be a governmental or non-governmental agency!


A quick way to construct circuits, far advanced beyond the archaic chunks of copper PC Board and superglue is to use prototype boards and wire wrapping. 

First, a disclaimer as wire wrapping is not suitable for RF circuits but really shines when using ones and zeroes in the digital world.



I am covering this subject today as wire wrapping is the process I am using to build the Digital LO / BFO for the 20M Hybrid Wireless Rig. 

Firstly, wire wrapping is over 60 years old as a technique and thus mature as a process. The wire wrap process is simple and involves a more or less square pin and using a special tool the wire is tightly wrapped about 10-15 times around the pin. The square pin has sharp edges, so the wire grabs around the pin and won't slip off. A round pin having no edges we find would not securely hold the wire.


Close up of wire wrap on the square pins


Wire Wrap Tools



Amazon 3 in 1 Wire Wrap Tool

Our ESP32 VROOM MCU has 38 pins thus a single header cut in two makes sockets for one device.  A pack of 10 costs about $10 so enough material for 10 ESP32 devices.

Should you make a mistake it is fairly easy to "unwrap" the wires and the bonus no soldering of wires.

Them that know can make things go. Them also are vigilant about unwanted surveillance like trackers that follow your internet meanderings. Norton and McAfee have software to fix the trackers. No kidding this is 1984 in 2025!

73's
Pete N6QW

Sunday, August 10, 2025

The Building of the Digital LO/BFO for the 20M Hybrid Wireless.

We are down in the weeds with the actual building of the Digital LO/BFO for the new 20M Hybrid Wireless set. 

But 1st did you turn off Alexa and did you check your blog, so it is sanitary? We are being watched, monitored and observed thus the concept of the land of the free and the home of the brave is now questionable.

I have been working on modifying the JF3HZB sketch for the new 20M Hybrid Wireless. So far, I am able to show on the face of the display a sideband selection (USB LSB), but the code still needs to work to actually generate two different BFO Frequencies. A single BFO Frequency would work OK if you only wanted one sideband like LSB on 40M or USB on 20M. 

A single BFO frequency would also work if you used a pair of filters out of say a Drake rig like a T4XC where the filters are switched in the circuit depending on the sideband you select. Thus, the filters are switched and not the BFO. A DPDT switch would do all of the heavy lifting, with 1/2 of the switch inputting to the ESP32 and the other 1/2 controlling two relays to switch in the different filters.

Yesterday was spent on the start of actually building the hardware. First up was a power supply. The Vin for the ESP32 is 5 VDC and having no 7805 three terminal regulators, I used as LM317 to create the 5VDC.


LM317 connections, R2 is adjustable to set 5VDC
(R2 = 220 Ohms + a 500 Ohm Trim Pot)



CNC Board Layout

The Built Power Supply


A slight adjust will make +5VDC

Once the supply was built and mounted on a board it will fit under the actual Digital LO/BFO, 


I made a part fit check of the ESP32, the Si5351 and the breakout headers. See below for the arrangement. Just to left of the top board midpoint you can see the Trimmer Adjust screw to set 5VDC.







Digital LO/BFO above the Power Supply

Final note is that I created an isolated copper pad where I soldered the LM317 to the copper pad and now we have a heatsink. Copper makes for a great heatsink and has better thermal conductivity at 2X!

⚖️ Comparison Table

PropertyCopperAluminum
Thermal Conductivity~400 W/m·K~200 W/m·K
WeightHeavyLight
CostExpensiveAffordable
MachinabilityDifficultEasy
Corrosion ResistanceHighModerate


Them that know, protect themselves. Dump Alexa, Tik Tok, LinkedIn, all social media, (X, and Facebook) and the ARRL. This is so that you create a very small digital footprint.  

You might also consider stop making You Tube political based videos as they are being watched by you know who. 



73's
Pete N6QW
Do you have any clue who is monitoring you?

Saturday, August 9, 2025

Cautions and Conspiracy Theories

No Radio Stuff today so now that you clicked on my link, you might want to find some other blog to consume your time. 

Given our current political state, the red flashing lights are on. No doubt we are all being monitored and that suggests we need to be aware of what we once took for granted.

I took a sledgehammer to that Alexa ball sitting in my living room. Here is what the Microshaft Copilot had to say when queried if Alexa was spying on me.

Short answer yes! All the stuff you asked Alexa is being recorded and stored on a server. Alexa employees have been known to peek at your files and old what is his name can gain access to that info. Unplug your Alexa, do it now!

What we write in a blog is also being perused and so even this homily is being scanned by some non-government or government organization. You must never use someone's real name nor suggest doing harm or other key words involving overt actions or devices that could cause harm. But is OK to say high voltage power supplies or magic smoke.

What we say on the air is an open forum and just that! Be it known that your discourse is not protected in the sense anything heard can be repeated without your express permission. A third party can simply say I heard a QSO on 40M where a ham in call area 7 said...

Basically, freedom of speech is no more protected or respected.

I was subjected to a scam (not successful) but here is what happened. When I was on vacation in Denver, my #3 son rented a car, and Denver has toll roads that are also Diamond Lanes. Electronic readers scan your plates and automatically send a bill to the plate owner. In the case of rental cars, boom it gets added to the car rental fees. 

So, I get a text message about owing a fee for a toll that was not paid. The scam device is somewhere on one of those roads as the scammer is pinging your cell phone number and then sends you a text message with a link where to send your credit card. I immediately identified the text sender as a scam. The scam software identifies any cell number outside of the Denver area and that is the scam target.

So, if this scam uses a sophisticated software program like this to get your credit card number just think what your government can do and is doing to watch what you do.

AI is at the root of this surveillance! Go to Copilot and make an inquiry using your call sign like: Tell me about the person with XYZ call sign. I was amazed and flattered that for the most part what was said about being a prolific SSB transceiver creator was true. Just a few simple words and you could get a visit from ICE or DHS. Trust me the government has far more sophisticated software than copilot. 




Them that know are careful about what they do.

73's
Pete N6QW
(Who is watching you?)


Friday, August 8, 2025

Parts are starting to arrive... many with tariffs.

There are, in my opinion, two critical parts to an SSB transceiver not withstanding solid-state or vacuum tube. These key pieces are the balanced modulator and the product detector. 

Today I would like to talk about a vacuum tube balanced modulator tube, the 6JH8. Many of the tube balanced modulators in the early days of SSB used the RCA 7360 Beam Deflection Tube. 

Check your early Swan's, or National transceivers and you will find the 7360. The rising cost of this tube caused a look at what else can do the job and enter the 6JH8, also a beam deflection tube at a fraction of the cost of a 7360.  Collins, Drake and Heathkit did not use the 7360 or other beam deflection tubes.

A Simple Tube Balanced Modulator.

You can read more on Balanced Modulator tubes for SSB HERE 

I bought a NOS tested, 6JH8 for $3 which arrived yesterday. My balanced modulator go to circuit is the same as the 7360 circuit as used in the Swan Monoband SSB circuits. I have seen 45 dB of carrier suppression using the 6JH8.

Them that know can make things go.

A big thank you to those who responded to my quest for 9 pin tube sockets.

73's
Pete N6QW



Thursday, August 7, 2025

The Great American Tariff Plan.

If you bought $10,000 worth of goods in a year subject to an average tariff of 20% you now have paid an additional lug of $2000 that has no tangible benefit to you. Big ticket items like foreign cars, stoves and refrigerators are not made here and until such time as they are, we are stuck with large tariffs!

The suppliers are not paying the tariff, you are. The tariff collected is then paid to the US government where it is placed in the General Fund and from there accountability is a blur. The government is hinting that the collected revenues would pay down the national debt or perhaps even a check paid out to individual citizens as a bonus. 

A $1000 bonus paid to all citizens is in the billions range and to date it is reported that the amount collected so far is about $100 Billion. So, the math says we likely we will recover only a small percentage if any at all. 

There is a cure and perhaps a silver lining... stop buying stuff and put a break on your consumerism. Do you really need a new car? The old stove or refrigerator may be dated but still working. Do I really need to build transceiver #60. 

Exempt of course are golf weekends and a white house ballroom makeover as these are simple image necessities that project power and superiority.

Them that know can make things go.

I did find IRF510's for $0.69 cents each at Jameco Electronic plus a 20% tariff.




73's
Pete N6QW

Wednesday, August 6, 2025

I am more than irritated... I am pissed!

The cupboard was bare, and I needed a stock of real IRF510's. The BoJack IRF510's available at Lauren Bezos OM's shop are already smoked even before you put them in a circuit. So, a trip to Digi Key where I nearly had Cardiac Arrest.


They have real IRF510's at $0.96 cents apiece in quantities of less than 50 pieces. That looks OK. In ordering 10 pieces the total bill was just shy of $20. A mental add up suggested that was too high by a couple of bucks. Yep, old what is his name Tariff added a 20% lug to the bill, or about $1.92. Translated across the new 20M Hybrid Wireless suggests a 20% or more increase to anything bought for the project.




So, tell me why tariffs are a good thing? The idea of buy American is certainly a wave the flag issue. But to what is his name, no American manufacturer is about to start up an IRF510 product line and if they did the unit cost without a tariff would be closer to $2.50 versus $0.96. So, the American manufacturers simply pass on that idea as $2.50 versus $1.16 (with a tariff of 20%) is not competitive. 

Thus, we get squeezed with the higher tariff, no buy American source is developed, where the foreign competition still is the winner, and the tariff ends up in somebody's pocket.

This is not good for us and yet more than 50% of voters chose this path. Today the excuse well I didn't realize that holds no water!

Some progress on Programming the ESP32 for the 20M Hybrid Wireless as shown below. I have coded the sideband select and it compiles but I need to actually wire in the switch for USB LSB selection.


First Prototype 20M Display

Them that know can make things go.

73's
Pete N6QW


Tuesday, August 5, 2025

Hard to find or costly hardware.

Vacuum Tubes and Tube Sockets are passe'. They are things of the past; stuff found under the tables at sweltering hot ham fests and not useful in an all-solid-state rig. Boom, today those items which were once a dime a dozen now are expensive.

Sticker shock is a great term to describe two 9 pin miniature tube sockets with a shield base. Lauren Bezos OM wants $12 for these two items. Scandalous and Shameful are the two operative words. eBay is no better!


I am now playing the POP card (Pity on Pete), asking anyone from the continental USA that has two of these and would part with them for the shipping costs to 91320.

These sockets used to cost about $2 each and now a 300% markup to $6 each. 

There is a total of 9 Tubes in the 20M Hybrid Wireless Set including five 7 pin miniature sockets (have those), three 9 pin miniature (have one) and one 12 Pin socket for the 12GE5 (have one).

Tubes are an issue as well as I have all of the tubes save for one 12BE6 (transmit mixer). These are going for $12 to $13 on eBay for a questionable previously owned unit. Again, invoking the POP card same deal.

I must admit that the signal reports from the 40M Hybrid Wireless frequently gets high marks on how it sounds. Thus, I am looking to repeat that success with the 20M Hybrid Wireless Set.

Them that know can make things go!


73's
Pete N6QW

In case you are keeping score...

 Interesting results... Iowa : Joni Ernst's Republican seat was won by Democrat Josh Turek. [senatordb.com] , [ballotpedia.org] Kansas :...