Monday, August 18, 2025

A slight change (for the better) in direction.

About 3 AM this morning, my brain said: Hey Pete, how about doing this. The suggestion was to take the 40M Hybrid Wireless and make that into the 20M version. The brain also suggested "Plug In" networks so that I could operate on either 40 or 20 Meters without resorting to a band switch. 


Plan View of the 40M Wireless

The above photo is the 40M Wireless sans any Final Output stage. Yes, a real mess that would have to be totally recreated for a new singular 20M version. For starters, this version works, and we have a good sense of the physical space required and a layout that could fit in our 12X12 space. But could this work on 20M is the question.

It was an easy test to ascertain the feasibility of such a project change and the short path was to program one of the spare ESP32 boards for 20M and dig into the junk box for a 20M Band Pass Filter Board. Boom... it worked as I copied stations on 20M and so that is a good idea worth pursuing.

This approach gets me a finished radio in a shorter time span, and we can focus on keeping much of the original 40M build, while also cleaning up this mess. In the process of doing this test I also learned a hidden (to me) feature to the JF3HZB code. 

Most of the Arduino code I have previously used when it comes to the Si5351 has a line in the code to set the correction factor for the Si5351. I looked in the Si53515 correction code set for the ESP32 and somehow could never find the lines of Si5351 code. This was an annoying nit as I was not 40Hz low but 2 kHz low, for which the SDR police would have my neck.

When I set up the 20M test code I noted that the BFO was off and now we were 5 kHz low. That caused me to look at the lines of code and that is when I realized there are two lines of code that need a numerical value for offset correction and the second was the carrier frequency. In the original GitHub download these were the same frequency.

Then I said let's fix the BFO frequency and a few trial runs fixed that issue. But we were not on the correct frequency on the dial. A few more runs of adjusting the frequency correction factor and that was now fixed. I even tested the code across the band, and it was correct. 

I am guessing here but suspect that the JF3HZB Si5351 correction is being done in another manner by using a specific modified BFO frequency and a separate numeric dial correction factor. All roads lead to Rome!


The 20M Code


I am glad my brain awoke me as now the task is not a mountain to climb but a large hill. A follow-on test is to build the Transmit 20M BPF and add in a 20M LPF. These two small changes would give me a 20M transceiver and that will seal the deal for this approach.

Gavin Newsome sent me an email to sign a letter he has drafted regarding some sort of political action in California. I would not sign such a letter, and it has nothing to do with whether it has my support. 

But in today's political environment that signature will become a part of a list of names to be investigated by the IRS and DHS as a part of Make America (you know). Any opposition to what is his name agenda brands you as anti-American. Shades of Joe McCarthy. We are indeed here at that point in the USA and freedom of speech is gone! Reduce your digital footprint.


Them that know can make things go.

73's
Pete N6QW


Sunday, August 17, 2025

A Really Nifty $40 Tool from Amazon

Every Friday I go to the cemetery for my weekly visit with the XYL. While the Santa Clara Catholic Cemetery in Oxnard does a pretty good job of mowing the lawn, that is it. So, I always have to do some grass trimming around the headstone and the ground mounted flower holders.

In some ways the additional time it takes to trim the grass and tidy up lets me spend more time on the visit. Up until about three weeks ago I was using a newly acquired pair of hand operated shears. Then I realized my constantly sore right hand was a result of carpal tunnel shearing. That led me to Amazon and this jewel.


Fully rechargeable (even from a laptop) it is good for about 20 to 30 minutes of cutting. Fitted with two attachments it can trim the grass as well as trim bush branches up to about 1/4 inch in diameter. Charging takes about 1/2 hour. It is well made and worth the $40.

There is always joy in seeing the two young Hispanic sisters who sell flowers at the cemetery entrance as they are still here. Anyone who looks Hispanic or speaks Spanish are at grave risk in Oxnard, a special target area of you know who.  

Them that know can make things go.

73's
Pete N6QW


Saturday, August 16, 2025

Sideband Select Now Works on the ESP32.

The culprit was a flag that had to be set to 1 in software and not to 0. With a heap of thanks to KK4DAS, Dean, who alerted me to the issue which resulted in the code being operational. So now I will go back and fix the 40M Hybrid Wireless so it can do FT-8 on USB. (Done!)

But my fumbling was an excellent learning experience, as I saw the opportunity for other improvements which I made. The bonus is the learning of a skill much akin to field stripping my .45 Automatic blindfolded when I was in the Seabees (or Mary Jo in the backseat of the 57 VW Beetle). When you get it, you get it!

So, I now can move forward with laying out the 12X12 inch mounting plate. to include the eight tubes in the lower-level stages, the solid-state stages (Audio Amp and RF Driver) and the final RF Amp, the 12GE5. 


The Finalized Digital LO/BFO

The above module took almost a month to build and troubleshoot. But there was real significant learning in how to work with the JF3HZB code. One shortcoming (sideband select) has been conquered. If you look in the lower right-hand corner to the right of the 5-pin cable connector (optical encoder) you can spot two LEDs. I added code so as you shift sidebands one of the LEDs is lit to show there is a change and the action carried out. That was a big plus when I was trouble shooting the assembly.

For the next layout process I will use cardboard cut outs which represent the actual sizes of the modules. It is an action not unlike using a Ouija Board where the variations in circuit placement enables an optimized final layout. 

One target is a 7X6 inch area for the eight tubes. The Audio Amp and Driver Boards will be on small PC Boards mounted on the underside of the chassis. Some shielding on the underside may be required. 

This was a giant step forward in having the Digital LO / BFO built and operational.

Them that know can make things go.

Reduce your digital footprint... it is a vital move. Anyone wondering what really happened in Alaska? Usually someone gets sold out. 

73's
Pete N6QW

Friday, August 15, 2025

AI to my Rescue!

I am not a coder nor sports enthusiast, but I do like to cook and certainly do appreciate good looking and fit older women.

Thus, writing sketches beyond the Mr. Miyagi LED ON and LED OFF exercise can be a challenge. Getting the sideband select feature on the Hybrid 20M Wireless falls into that category.

The original JF3HZB code did not have sideband selection and thus my current challenge. I was not even sure flipping a switch was doing anything in the sketch with the code I wrote. (It wasn't.) So, I asked "copilot" for the Miyagi sequence for the ESP32. A sequence was provided by copilot which I actually got to work with just that sketch. I then fitted that On Off code sequence into the JF3HZB code. 


AI generated script.

The switch flipping now does do two things, with one of those lighting a LED and the second is to load a value for the BFO frequency. BUT it is still not correct! The LED lights and the code will load the 2nd BFO value, but you have to restart the ESP32 with the switch closed to see the 2nd value. Thus, the code execution sequence is still awry!

But with hope, this is moving closer to a resolution more so than last week.

Turn off Alexa and reduce your digital footprint for they are coming for us. Some believe this is far-fetched. But so was the notion that things would get better under what is his name. The data doesn't lie... just look at your grocery bill and the tariff lug on electronic parts.

Them that know can make things go.

73's
Pete N6QW

Thursday, August 14, 2025

Every Thing Changes But Nothing Changes!

Is that really true? Well my answer is that indeed its true. Example we have some of the slickest technology in our rigs, but they still have problems. You know... that newly constructed 100 watt RF amplifier works great on 20M but is an attenuator on 10M or the code for the ESP32 MCU simply does not work despite being generated by AI. That newly built one tube regen retro circuit simply does not regen. 


We fuss, fret, ponder drinking, fever dream removing all the components yet a non-functional lump remains. Nothing we do seems to change the outcome thus every thing changes but nothing changes.

I had a great opportunity to spend some quality time with son #3 during our Colorado sojourn and he was sharing with me some of his current workplace experiences. I was totally shocked and amazed... different industry, advanced technology, and a 40 year time warp BUT the very same issues and problems I saw some 40 years ago when I was his age working in aerospace. Surprisingly the only common element is the human element.

We will not delve into those running our government as I am sure they monitor all blogs and you tube videos. So I will stop there.

I fabricated some more IF Can mounting plates as I found the copper PC Board is a bit thick for the Spring Clip mounted versions but OK for the solder lug type cans. I had some thin scrap aluminum and that is the perfect thickness for the Spring Clip type. 

I would be happy to share the dxf files for the two types should a reader have a CNC. I think back to all the times I hand cut IF Can mounting holes and most looked like a real butcher jobs. Now I just have to punch the Start button. Wow something did change and it required me to make the change... human element.








Turn off Alexa and reduce your digital footprint as AI is watching you.

Them that know can make it go.

73's
Pete N6QW

Wednesday, August 13, 2025

20M Hybrid Wireless Balanced Modulator Transformer

Time for some Homebrew Magic and Tribal Knowledge Tips. Several Blog posts ago I showed a notional schematic of a tube based Balanced Modulator. You can check it out. A key piece is the Balanced Modulator RF transformer.


The primary side of this transformer is in the plate circuit of the receiver mixer (6BE6) and is capacitively coupled to the crystal filter which in this case is a Heathkit Crystal Filter with a Center Frequency of 3.395 MHz. 

[Note the 6BE6 is used versus a 12BE6 as this tube's filaments are in series with the 6JH8 as all other tubes are 12 VDC filaments. DC is used versus AC because we saw AC hum pickup by the 6JH8 in the 40M Wireless.]

The secondary is an interesting arrangement in that each end of the windings connects to the plates of the 6JH8 and plate voltage is shunt fed to these same plates via 47K resistors. Each Plate has a Capacitor connected from the Plate to Ground.




This is the tricky part as this arrangement has the effect of summing the balanced outputs from the 6JH8 which is then reflected into the primary side of the transformer and onto the Crystal Filter. Believe it or not but the two caps although connected to ground are in series and resonate the secondary at 3.395 MHz.

Two transformer windings and two capacitors play a huge role in the transceiver for both receive and transmit and this is one reason why I identified the Balanced Modulator as a key piece of this transceiver.

We must homebrew this BM transformer and I started with a 455 kHz IF transformer that required two modifications, the 1st of which is how to mount it to the chassis plate and the 2nd piece is to convert the windings to 3.395 MHz. Fortunately, the paper coil form has ferrite cores so the primary and secondary each can be peaked at the operating frequency.


IF Transformer and Spring Clip

IF transformers were mass produced, cheaply made and were set up for quick installation. The foundation chassis was punched so that the IF transformer fits in a slotted mount and a U shaped spring clip was placed underneath the chassis, passed through slots in the chassis and clipped into holes in the sides of the IF Can. It was a snug fit and the transformer was anchored  solidly in place.

I attacked the mounting adapter plate as a 1st chore and a key tool is a set of digital calipers which are hawked by Lauen Bezos' OM. It cost a whopping $20.


Using this tool I measured the base of the IF Transformer and wrote a program for my CNC mill. Boom it was spot on like your feet in a pair of custom shoes.


Prototype IF Can Cut Out


Fit Check


Snug Fit

Bonus Package: CNC Milling with the Clip






The IF can I chose out of a batch I have does not use the spring clip but has two lugs which likely  were originally soldered to a piece of PC Board. Using my CNC Mill I was able to accommodate the Spring Clips for the actual two IF cans.

The next step was to modify the transformer to work at 3.395 MHz and at this stage I removed all of the wire from the paper core and made two windings of 20 Turns each using #30 enamel wire. This was a starting point and no magic calculations involved. As a starter I tack soldered a 100pF cap across one of the windings to simulate the two capacitors in series. Using a signal generator and my 200MHz DSO I saw this resonated at about 6 MHz. I then tried a 330pF cap and tuned the cores and this is what I got. I did not forget that the impedance of the Heathkit filter is 2K which translates to about 94 microhenries. Thus 20 Turns might be a little light, which suggests perhaps more turns may be needed. Keep in mind our homebrew processes are often experimental.



3.395MHz




In the final build each capacitor would be 660pF as the series combo of capacitors are like resistors in parallel. 

This is just a start and we might find that we will need further tweaking once installed in a circuit. At the very least we have a starting point.

This was a fast tour through fabricating a home brew Balanced Modulator and note no Nano VNA's were used to derive this answer.

The fabrication of this rig has relied on tools perhaps not found in every ham shack like digital calipers and CNC Mills. True my CNC Mill cost me $250K but you can buy a mill for around $300 from Amazon and of course we know a $20 Bill will get you the calipers.




Them that know can make things go.

Did you turn off Alexa and reduce your digital footprint? Take action before it is too late as they are after all of us.

73's
Pete N6QW 

Tuesday, August 12, 2025

Numbskulls, NIMCELS and SS Podcast #261

SolderSmoke Podcast #261 dated August 7, 2025 discussed rich topic areas for hams worldwide.  Coexisting in that podcast were the terms Numbskull and NIMCEL.

A Numbskull is a derisive term literally meaning a person whose brain has gone into hibernation whereas a NIMCEL is an acronym coined by the New York Times which means Niche Internet Micro Celebrity. A NIMCEL often is a Tik Tok or You Tube star with a following whose claim to fame is Cat Videos or demonstrations of how to unclog your toilet.

The mere fact that I participate in the podcasts and soon will celebrate   close to 100 podcasts puts me in the NIMCEL target bullseye and my daily forays into smoked parts and release of magic smoke certainly suggests Numbskull.

Yesterday was a partial Numbskull Day as I finished wiring up the 20M Digital LO / BFO. I counted the wrong number of pins on the underside of the prototype board and a wire wrap connection was put on a wrong pin. It didn't smoke but it didn't work! The circuit would boot up but kept resetting. Yes, I did do a wiring check initially but made the same mistake in the counting error.








Now in my defense the ESP32 VROOM does not sequentially number the pins like on the Arduino. The sequential numbering could be like 18, 2, 5, 21, 17. You get the drift.


Proof of Life!

About two more times through the wire list and I found the error and the unit is now working. But still an issue remains.

On one GPIO pin (Pin 25) I designate this as the Sideband Select pin and previously, I simply had the display change to USB or LSB. That worked on the display but did not actually change the BFO frequency. 

Then I hit upon an idea to show the actual value to be loaded into the sketch and those two numbers exist in only one place in the sketch. Bottom Line engage the switch and load this number into the sketch, and upon disengagement load this number. Once loaded, show the number on the display. In my numbskull this was full proof it worked!

Well that partially worked as you see the BFO actual value change on the display but not in real life. I know how to do this with the Arduino, but the ESP32 proves I am a numbskull.

In a prior blog posting I identified what I thought were two critical areas in a SSB transceiver those being the Balanced Modulator and the Product Detector. I have to homebrew the Balanced Modulator transformer and am starting with a 455KHz IF transformer that has two windings. 

There are two issues with this mod, one is moving the frequency up to 3.395 MHz (about 1/8 the windings) and two how to mount the transformer on a 1/16-inch aluminum plate. The chassis plate is 12X12 inches. 

My plan is to CNC mill out a 1.125 inch by 1.125 inch copper PCB as a mounting plate for the transformer and then mount this adapter plate to the aluminum chassis plate.

Turn off Alexa and reduce your digital footprint as you know who is watching you.

Them that know can make things go.

73's
Pete N6QW

In case you are keeping score...

 Interesting results... Iowa : Joni Ernst's Republican seat was won by Democrat Josh Turek. [senatordb.com] , [ballotpedia.org] Kansas :...